Dual link resolutions deliver uncompressed digital video with audio to a remote screen up to 50m away, with USB 2.0 connection to interface with a range of devices



Part of the AdderLink® X-DVI PRO range, the X-DVI PRO-DL high-performance, digital KVM (Keyboard, Video and Mouse) and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment.  Uncompressed digital video and audio is distributed in real-time and with zero latency via a Dual Link DVI video stream, allowing the user to maintain an at-the-PC experience.  The USB 2.0 interface ensures compatibility with a wide range of USB devices.

  • Dual Link resolutions: deliver uncompressed digital video with audio
  • USB 2.0 Low and Full speed connection: to interface with a range of devices
  • Exact content seen on the local monitor is distributed: up to 50m over a single CATx cable
  • Energy efficient design: external power supplies are not needed 
  • X-DVIPRO-DL: enables single screen at 2560 x 1600@60Hz
Product codes

Product Features

  • Dual Link resolutions for pixel perfect digital video with real time control: using uncompressed video extension; no visible artefacts or latency are introduced allowing you to be certain of quality and control
  • Distribution up to 50m over a single CATx cable: video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50m of extension with resolutions up to 2560x1600@60Hz (distance dependent upon video resolution, CATx cable type, and number of connection intervals)
  • USB 2.0 enables connection of any USB interface device: from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and mass storage devices. Support for Full speed (12Mbps) isochronous devices, e.g. headsets
  • HDMI video and audio extension capabilities: Digital audio for 8 channels of HDMI audio, supported simultaneously to analog audio
  • Stereo analog audio: Stereo channel 16bit sampled at 44.1kHz to transfer audio from local to remote for line out
  • Power efficiency: transmitter unit can be powered solely from the host computer’s USB connection
  • EDID management: Extended Display Identification Data (EDID) enables the remote system to exactly mirror the date coming from the source monitor
  • Plug and Play: AdderLink X-DVIPRO extenders are delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software
  • Robust yet lightweight: small form factor, rack mountable device



The system delivers analog stereo audio (Line Out). 8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).

Approvals / Compliance

  • CE
  • FCC


DVI-D Interface – digital only the system supports resolutions to a maximum of 2560x1600 @60Hz.

Hardware compatibility: All computers with DVI-D, USB and audio - requirement dependent.

Cable Guidelines

Recommended cables are CAT7 shielded foiled twisted pairs:

Daetwyler 7702  Flexible patch cable

Daetwyler 7120  Bulk cable

CAT5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. Distances are achieved using single lengths of trunk/bulk cable.

For each break/patch connection reduce distance by 5m. Preferably patch cables should be of type  CAT7a and less than 2m. Patch cables over 2m must be CAT7a. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO DL independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.
CAT5e is not recommended for use with this system


Resolution Cable Type Patch Connections Total Distance
2560 x 1600 @ 60Hz CAT7 0 50 meters
2560 x 1600 @ 60Hz CAT6a (shielded) 0 50 meters
2560 x 1600 @ 60Hz CAT5e (shielded) 0 50meters
2560 x 1600 @ 60Hz CAT7 2 40 meters


Operating Temperature: 0 to 40ºC / 32 to 104ºF 

Connectors – Local Unit

DVI-D, Audio 3.5mm in, USB type B

Connectors – Remote Unit

DVI-D, Audio 3.5mm out, USB type A x 4.


Compact case, robust metal construction 120mm / 4.7’’ (w) x 75mm / 3’’(d) x 26mm / 1’’ (h) 320g / 0.7 lb


Rx: 2.5mm DC jack (power adapter included),100-240V AC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter. TX: Powered from single USB connection. Optional 2.5mm DC jack (power adapter not included).


Compatible with all known operating systems

Associated products


ADDERLink DV104T is a high performance digital video extender and splitter that enables you to locate your critical play out hardware in a secure and temperature controlled environment away 


ADDERLink® DV120 is an easy to install, highly compact digital video extender system capable of transmitting an HD video stream over a single CATx cable via a DVI connection. This allows you to locate your media playback hardware in a secure and temperature-controlled environment.


Part of the ADDERLink® X-DVI PRO range, the high-performance X-DVI PRO-MS digital KVM (Keyboard, Video and Mouse) and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment.  Uncompressed digital video and audio is distributed in real-time and with zero latency to multiple screens, allowing the user to maintai


The AdderLink® X-USB PRO delivers uncompressed USB, VGA video and audio extension up to 300m over a single CATx cable, achieving industry-leading video clarity, system compatibility and space saving.  Two users can remotely access and interact with the same system simultaneously from their respective complete desktop configurations.


ADDERLink® X50 is compact in size and delivers uncompressed, lossless extension of USB peripherals including Keyboards, Video and Mice (KVM) up to 50m (150ft) over a single CAT5 or higher UTP cable.


As part of the ADDERLink® INFINITY® range, ADDERLink Infinity 1002 is a high performance KVM extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment, isolated from the user work station. Configurable as a single head or single link, this extender provides pixel perfect video with minimal lag across a distance of up to 10km.

Product Gallery


Product manual
Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
Ordering information

X-DVIPRO-XX: Pair including TX and RX units

XX = Mains Lead Country Code:
UK  = United Kingdom
US  = United States
EURO  = Europe
AUS  = Australia